NEC XG85-XG135LC - 1 Manual page 79

5 Use the CURSOR
or
S2, S1, and OFF, and then press ENTER.
Items to select
S2 .............. Identifies squeeze and letter box signals.
S1 .............. Identifies a squeeze signal only.
OFF ............ Does not identify any S-video signal.
6 To end, press the END button.
• Whenever the END button is pressed, the menus will sequence
in this order:
"OPTION" menu "ADJUST" menu
• If the "RETURN USER MODE?" menu appears, use the
CURSOR or button to select either "YES" or "NO" and
press ENTER. This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• N O ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
NOTE :
• The input signal must be compatible with the S2/S1 MODE
standard.
Refer to the user manual included with the connected equip-
ment for more information.
• The identification function may not work correctly with a non-
compatible signal. If this happens, select "OFF" from the "S-
VIDEO MODE SELECT" menu.
button to select one of the three items:
Source screen
79
S - V I D E O M O D E S E L E C T
S 2
S 1
O F F
RETURN U SER MODE?
Y E S N O
SETTING