Download  Print this page

NEC X551UHD Installation Manual

Hide thumbs
   

Advertisement

Quick Links

X551UHD Installation Guide
55" LCD Display
Contents:

Product Description:

Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.

Tilt Angle and Rotation:

Below is the maximum angle the monitor can be tilted. Note that the monitor can only be tilted in the landscape position.
Brightness Setting must not exceed 70
www.necdisplay.com
LCD Display
3840 x 2160
16:9
Class B
190W (max with no speaker/OPS slot)
1706.07 BTU/hour
Face Up/Face Down
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 5
Page 6
Page 7
Page 8
Page 8
Page 9
Page 9
Dimensions without stand: 49.2" (W) x 28.4" (L) x 3.1" (D)
Dimensions with stand:
Weight without stand:
Weight with stand:
49.2"(W) x 29.9"(H) x 15.7"(D)
63.3 lbs
68.1 lbs
X551UHD
Page 1 of 9
Rev 1.0

Advertisement

loading

  Also See for NEC X551UHD

  Related Manuals for NEC X551UHD

  Summary of Contents for NEC X551UHD

  • Page 1: Table Of Contents

    NEC Display Solutions of America, Inc. X551UHD Installation Guide 55” LCD Display Rev 1.0 Contents: Product Description and Notes Page 1 Tilt Angle and Rotation Page 1 Ventilation Recommendations Page 2 Display Dimensions Front, Top, Right Side, Left Side Page 3 Rear &...
  • Page 2: Ventilation Recommendations

    The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
  • Page 3: Display Dimensions

    NEC Display Solutions of America, Inc. X551UHD Installation Guide 55” LCD Display Rev 1.0 Display Dimensions: www.necdisplay.com X551UHD Page 3 of 9...
  • Page 4: Rear & Bottom

    NEC Display Solutions of America, Inc. X551UHD Installation Guide 55” LCD Display Rev 1.0 Display Dimensions (cont.): www.necdisplay.com X551UHD Page 4 of 9...
  • Page 5: Display Dimensions With Stand

    NEC Display Solutions of America, Inc. X551UHD Installation Guide 55” LCD Display Rev 1.0 Table Top Stand Dimensions (ST-5220): www.necdisplay.com X551UHD Page 5 of 9...
  • Page 6: Optional Speaker Dimensions (Sp-Tf1)

    NEC Display Solutions of America, Inc. X551UHD Installation Guide 55” LCD Display Rev 1.0 Optional Speaker Dimensions (SP-TF1) www.necdisplay.com X551UHD Page 6 of 9...
  • Page 7: Optional Speaker Dimensions (Sp-Rm1)

    NEC Display Solutions of America, Inc. X551UHD Installation Guide 55” LCD Display Rev 1.0 Optional Speaker Dimensions including holder (SP-RM1): www.necdisplay.com X551UHD Page 7 of 9...
  • Page 8: Input Panel

    NEC Display Solutions of America, Inc. X551UHD Installation Guide 55” LCD Display Rev 1.0 Input Panel: Bottom Side (Rotated) Control Codes: NOTE: Contact your NEC representative for codes not listed. www.necdisplay.com X551UHD Page 8 of 9...
  • Page 9: Cable Connection

    All displays are set to the IP address 192.168.0.10 out of the box Communicating network PC needs to be on the same subnet as display that is being communicated with Note: Above browser control states X841UHD but is consistent with the X551UHD. www.necdisplay.com...