NEC XG85-XG135LC - 1 Manual page 81

5 Use the CURSOR
or
"MANUAL" and then press ENTER.
When selecting "AUTO"
One of the video standards is selected automatically and is
displayed in the SOURCE INFORMATION screen.
Video Modes
• NTSC3.58 ............ Indicates the NTSC3.58 video standard
• NTSC4.43 ............ Indicates the NTSC4.43 video standard
• PAL ..................... Indicates the PAL video standard
• SECAM ................ Indicates the SECAM video standard
• RGB ..................... Indicates the RGB mode
• Select "AUTO" in normal operation.
When selecting "MANUAL"
The "VIDEO MODE SELECT" menu will be displayed. Use the
CURSOR or button to select the preferred video mode and
then press ENTER.
Items to select
• NTSC3.58 Switches to the NTSC3.58 mode
• NTSC4.43 Switches to the NTSC4.43 mode
• PAL ......... Switches to the PAL mode
• SECAM .... Switches to the SECAM mode
• Select "MANUAL" when connecting to poor quality signal or
non-standard signals such as video games.
NOTE: The projector may not function correctly with a mono-
chrome signals in the AUTO mode.
6 To complete, press the END button.
• Whenever the END button is pressed, the menus will sequence
in this order:
"OPTION" menu "ADJUST" menu
• When your passcode is in effect, the "RETURN USER
MODE?" menu is displayed. If this happens, use the
CURSOR or button to select either "YES" or "NO" and
press ENTER.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• N O ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
button to select either "AUTO" or
Source screen
81
V I D E O M O D E S E L E C T
A U T O
M A N U A L
V I D E O M O D E S E L E C T
N T S C 3 . 5 8
N T S C 4 . 4 3
P A L
S E C A M
RETUR N USER MOD E?
Y E S N O
SETTING