Download  Print this page

NEC X461UN - MultiSync - 46" LCD Flat Panel Display Installation Manual

46” lcd display
Hide thumbs
   

Advertisement

X461UN Installation Guide
46" LCD Display
Contents:

Product Description

Type:
Resolution:
Quad Resolution:
Aspect Ratio:
FCC:
Power Consumption:
Quad Power Consumption:
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by-step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.

Tilt Angle and Rotation

Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Max. 20 deg
www.necdisplay.com
LCD Display
1366 x 768
1920 x 1080
16:9
Class B
330W (max)
1320W (max)
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Screen Surface:
Dimensions:
Quad Dimensions:
Weight:
Quad Weight:
BTU's:
Quad BTU's:
X461UN
Rev 1.0
Anti-Reflective
40.4"(W) x 22.8"(H) x 5.0"(D)
80.7"(W) x 45.6"(H) x 5.0"(D)
64.6 lbs
258.4 lbs
1127 BTU/hour
4508 BTU/hour
Page 1 of 9

Advertisement

Table of Contents
loading

  Also See for NEC X461UN - MultiSync - 46" LCD Flat Panel Display

  Related Manuals for NEC X461UN - MultiSync - 46" LCD Flat Panel Display

  Summary of Contents for NEC X461UN - MultiSync - 46" LCD Flat Panel Display

  • Page 1: Table Of Contents

    NEC Display Solutions of America, Inc. X461UN Installation Guide 46” LCD Display Rev 1.0 Contents: Product Description and Notes Page 1 Tilt Angle and Rotation Page 1 Ventilation Requirements Page 2 Display Dimensions Front, Top & Right Side Page 3 Rear &...
  • Page 2: Ventilation Requirements

    NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
  • Page 3: Display Dimensions

    NEC Display Solutions of America, Inc. X461UN Installation Guide 46” LCD Display Rev 1.0 Display dimensions SCREEN SURFACE (ACTIVE AREA) I/O Terminal www.necdisplay.com X461UN Page 3 of 9...
  • Page 4: Rear & Bottom

    NEC Display Solutions of America, Inc. X461UN Installation Guide 46” LCD Display Rev 1.0 Display dimensions (cont.) AC Input Control Panel Power Switch 16 - M4 Depth 6mm Max 4 - M6 Depth 12mm Max for mount unit RATING LABEL...
  • Page 5: Optional Wall Mount Dimensions

    NEC Display Solutions of America, Inc. X461UN Installation Guide 46” LCD Display Rev 1.0 Dimensions with Optional Wall Mount Kit (WMK3260-L) RATING LABEL www.necdisplay.com X461UN Page 5 of 9...
  • Page 6: Quad Configuration Resolution

    NEC Display Solutions of America, Inc. X461UN Installation Guide 46” LCD Display Rev 1.0 Quad Configuration Resolution 1366 x 768 1366 x 768 1366 x 768 1366 x 768 Note: 1920x1080 is the maximum input resolution while using Tile Matrix.
  • Page 7: Quad Dimensions With Optional Wall Mount Kit

    NEC Display Solutions of America, Inc. X461UN Installation Guide 46” LCD Display Rev 1.0 Quad Dimensions with Optional Wall Mount Kit (WM-46UN-2x2) RATING LABEL RATING LABEL RATING LABEL RATING LABEL www.necdisplay.com X461UN Page 7 of 9...
  • Page 8: Optional Wall Mount Kit Dimensions

    NEC Display Solutions of America, Inc. X461UN Installation Guide 46” LCD Display Rev 1.0 Optional Wall Mount Kit Dimensions (WM-46UN-2x2) www.necdisplay.com X461UN Page 8 of 9...
  • Page 9: Control Codes

    01 30 41 30 45 30 41 02 30 30 30 32 30 30 30 31 03 77 0D AUTO 01 30 41 30 45 30 41 02 30 30 30 32 30 30 30 32 03 74 0D NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection...