Table of Contents
Advertisement
On ADJUST MODE
The ADJUST mode contains various adjustment items for set-up.
Open the ADJUST menu and select the item you wish to adjust. To
display the ADJUST menu, proceed as follows:
1 Press the ADJUST button.
• The projector may ask for your passcode.
2 Enter your registered passcode.
When a passcode has not been registered:
• Since no passcode is programmed at the factory, pressing the
ADJUST button will open the ADJUST menu.
• See "Entering Passcode", "Registering Passcode", "Changing
Your Passcode" and "Canceling Your Passcode" on pages 61
through 66.
When your passcode has already been registered:
• When finishing the ADJUST mode, the "RETURN USER
MODE?" menu will be displayed. If you select "YES" and
press ENTER to end the ADJUST mode, you will have to
enter your passcode to re-enter the ADJUST mode.
• When finishing the ADJUST mode by either selecting "NO"
or pressing END, you do not need to enter your passcode to
re-enter the ADJUST mode. To exit the ADJUST mode
temporarily during adjusting, select "NO".
17
BEFORE SET-UP
P A S S C O D E ?
****
Advertisement
Table of Contents
