Default Input Selection - NEC XG85-XG135LC - 1 Manual

Default Input Selection

You can set the projector to default to any one of its inputs each time
the projector is turned on.
Proceed as follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 61 for the explanation of the PASSCODE.
2 Use the CURSOR
or
line. Press ENTER to display the "OPTION" menu. You can also
select the "OPTION" menu directly by pressing the INPUT "8"
button.
3 Use the CURSOR
or
MODE" line. Press ENTER to display the "SETTING MODE"
menu. You can also select the "SETTING MODE" menu directly
by pressing the INPUT "1" button.
4 Use the CURSOR
or
INPUT SELECT" item, then press ENTER to display the
"DEFAULT INPUT SELECT" menu.
NOTE: The SETTING MODE has three menus. The "DEFAULT
INPUT SELECT" item is on the first menu (P01). To access P02
or P03 from P01, press and hold down the CTL button then
press the button; to return to P01 from P02 or P03, press
and hold down the CTL button then press the
button to highlight the "8/OPTION"
button to highlight the "1/SETTING
button to select the "DEFAULT
button.
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / K E L V I N
6 / R , G , B G A I N
7 / P A S S C O D E
8 / O P T I O N
9 / R E F . A D J U S T
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
6 / H O U R M E T E R
7 / D E F A U L T D A T A
P01/P03
PJ ORIENTATION
CONNECT CONDITION
DEFAULT INPUT SELECT
FOCUS EDGE MODE
S-VIDEO MODE SELECT
VIDEO MODE SELECT
73
OPTION – SETTING MODE –
CEILING
FRONT
STANDALONE
LAST
ALL
S2
AUTO
SETTING