Table of Contents
Advertisement
5 Use the CURSOR
or
"ENABLE" and press ENTER.
Items to select
• DISABLE .. An error message will appear at the bottom of the
screen and the signal is not switched when one of
the INPUT buttons is pressed with CTL.
• ENABLE ... The signal is switched to the corresponding signal
when one of the INPUT button is pressed with
CTL.
6 To complete this, press END.
• Whenever the END button is pressed, the menus will sequence
in this order.
"OPTION" menu
"ADJUST" menu
• If the RETURN USER MODE ? menu appears, use the
CURSOR
or
button to select either "YES" or "NO" and
press ENTER. This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next,
you will not need to re-enter your passcode.
button to select either "DISABLE" or
Source screen
93
D I R E C T E N T R Y A C C E S S
D I S A B L E
E N A B L E
RETUR N USER MOD E?
Y E S
N O
SETTING
Advertisement
Table of Contents
