Rgb/Component Search Setting - NEC XG85-XG135LC - 1 Manual

SETTING

RGB/COMPONENT Search Setting

This feature allows you to set the searching method of RGB/
COMPONENT signal.
To set this feature, proceed as follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 61 for the explanation of PASSCODE.
2 Use the CURSOR
or
TION" line. Press ENTER to display the "OPTION" menu. You
can also select the "OPTION" menu directly by pressing the
INPUT "8" button.
3 Use the CURSOR
or
TING MODE" line. Press ENTER to display the "SETTING
MODE" menu. You can also select the "SETTING MODE"
menu directly by pressing the INPUT "1" button.
4 Use the CURSOR
or
NENT SEARCH" item on Page 3, then press ENTER to display
the "RGB/COMPONENT SEARCH" menu.
NOTE: The SETTING MODE has three menus. The "RGB/
COMPONENT SEARCH" item is on the third menu (P03). To
access P03 from P01, press and hold down the CTL button then
press the v button twice; to return to P01 from P03, press and
hold down the CTL button then press the
5 Use the CURSOR
or
or "AUTO" and press ENTER.
When used in a stand alone operation:
Items to select
*MANUAL ............ Searches RGB signals only
*AUTO .................. Searches COMPONENT signals automati-
cally after searching RGB signals.
NOTE: This feature corresponds to R/Cr, G/Y, or B/Cb input
terminal of INPUT A slot. INPUT B and C slots are depending on
setting of the optional input board.
In regardless of this setting, pressing INPUT "10" button
searches a COMPONENT signal.
button to highlight the "8/OP-
button to highlight the "1/SET-
button to select "RGB/COMPO-
button twice.
button to select either "MANUAL"
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / K E L V I N
6 / R , G , B G A I N
7 / P A S S C O D E
8 / O P T I O N
9 / R E F . A D J U S T
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
6 / H O U R M E T E R
7 / D E F A U L T D A T A
P03/P03
DIRECT ENTRY ACCESS
B-FOCUS TRACKING
OPTION TERM BAUD RATE
RGB/COMPONENT SEARCH
RGB/COMPONENT SEARCH
96
OPTION – SETTING MODE –
DISABLE
OFF
9600 BPS
MANUAL
MANUAL
AUTO