NEC X981UHD-2 Installation Manual

X981UHD-2 Installation Guide
98" LCD Display
Contents:
Product Description and Notes
Tilt Angle and Rotation
Ventilation Recommendations
Display Dimensions
Front, Top, Right Side, Left Side
Rear & Bottom
Display Dimensions with stand
Optional Stand dimensions
Optional Speaker Dimensions (SP-TF1)
Optional Speaker Dimensions (SP-RM1)
Input Panel
Control Codes
Cable Connection
Browser Control

Product Description:

Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:

This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.

Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.

4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).

Distances are in inches, for millimeters multiply by 25.4.

Distances may vary ±5%.

Tilt Angle and Rotation:


Below is the maximum angle the monitor can be tilted. Note that the monitor can only be tilted in the landscape position.
Brightness Setting must not exceed 70
www.necdisplay.com
LCD Display
3840 x 2160
16:9
Class B
560W (max with no speaker/OPS slot)
1910.80 BTU/hour
Face Up/Face Down
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 5
Page 6
Page 7
Page 8
Page 8
Page 9
Page 9
Dimensions without stand: 86.8" (W) x 49.6" (L) x 4.3" (D)
Dimensions with stand:
Weight without stand:
Weight with stand:
86.8"(W) x 51.1"(H) x 23.9"(D)
199.7 lbs
209.9 lbs
X981UHD Page 1 of 9
Rev 1.0