Download  Print this page

Picture Settings Menu; Adjusting The Picture; Setting The Picture Mode According To The Brightness Of The Room - NEC PlasmaSync 50XM3 Model Information

Hide thumbs

Advertisement

Table of Contents

Picture Settings Menu

Adjusting the picture

The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
1. On the MAIN MENU, select "PICTURE", then press
the MENU/ENTER button.
The "PICTURE" screen appears.
2. Use the
and
buttons to select "CONTRAST".
PICTURE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
NEXT PAGE
SEL.
ADJ.
3. Use the
and
buttons to adjust the contrast.
CONTRAST
* If neither the
or
button is pressed within 5 seconds,
the current setting is set and the previous screen
reappears.
Note: If "CAN NOT ADJUST" appears ...
When trying to enter the PICTURE submenu, make sure
PICTURE MODE is not set to DEFAULT.
Information
Picture adjustment screen
CONTRAST .... Changes the picture's white level.
BRIGHTNESS .. Changes the picture's black level.
SHARPNESS .. Changes the picture's sharpness.
Adjusts picture detail of VIDEO
display.
COLOR ........... Changes the color density.
TINT ................ Changes the picture's tint. Adjust for
natural colored skin, background, etc.
Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.
Restoring the factory default settings
Select "DEFAULT" under the "PICTURE MODE"
settings.
1 / 2
:
NORMAL
:
OFF
EXIT
RETURN
E-19
3-88
Setting the picture mode according to the
brightness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
Example: Setting the "THEAT. 1" mode
1. On the MAIN MENU, select "PICTURE", then press
the MENU/ENTER button.
The "PICTURE" screen appears.
2. Use the
and
buttons to select "PICTURE
MODE".
PICTURE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
NEXT PAGE
SEL.
ADJ.
3. To set to "THEAT. 1" ...
Use the
and
buttons to select "THEAT. 1".
The mode switches as follows each time the
button is pressed:
→ BRIGHT ↔ NORMAL ↔ THEAT. 1 ↔ THEAT. 2 ↔ DEFAULT ←
PICTURE MODE
* If neither the
or
button is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.
Information
Types of picture modes
THEAT. 1, 2 ...... Set this mode when watching video in
a dark room.
This mode provides darker, finer
pictures, like the screen in movie
theaters.
For a darker image, select THEAT. 2.
NORMAL ......... Set this mode when watching video in
a bright room.
This mode provides dynamic pictures
with distinct differences between light
and dark sections.
BRIGHT ........... This mode provides brighter pictures
than NORMAL.
DEFAULT......... Use this to reset the picture to the
factory default settings.
CONFIDENTIAL
1 / 2
:
NORMAL
:
OFF
EXIT
RETURN
or
:
THEAT. 1

Advertisement

Table of Contents
loading

  Related Manuals for NEC PlasmaSync 50XM3