Power Button; Keyboard Panel - NEC VERSA FX Service And Reference Manual


!
NEC VersaGlide — The NEC VersaGlide works like a standard computer mouse.
Simply move your fingertip over the VersaGlide to control the position of the cursor.
Use the selection buttons below the VersaGlide to select menu items.

Power Button

The Power/Sleep button is a "smart" switch, meaning that it recognizes when the system is in
Standby mode. If in Standby mode, you cannot power off until you slide the Power button to the
right to resume operation. (The BIOS parameter "System Switch" must be set to "Sleep.")
Put the unit in Standby mode when you need to be away from your system for a short period of
time and want to return to where you left off. Standby mode shuts down all devices in the
system while retaining data and system status. Go to Start, Shutdown, Standby to put your
system into Standby mode.
Use the Power button in the following ways:
!
Slide the Power to the right to power on.
!
Slide the Power button to the right to resume from Standby mode and proceed with
normal operation.
!
Hold the Power button in place for 4 or more seconds to power off the system (power
override). Only use this option if you cannot power off your system using Start,
Shutdown.

Keyboard Panel

The NEC Versa keyboard panel offers the following features, which are described after the
figure.
A – Function Keys
B – Numeric Keys
C – Windows keys
!
Function keys — Twelve function keys,
Versa keyboard. These keys work together with the
Several keys are preprogrammed with dual functions and some are printed in blue on the
key.
Num Lock — lights when Num Lock mode is active.
Keyboard
D – Cursor Control Keys
E – Control Keys
through , are available on the NEC
F1 F12
key to activate special functions.
Fn
System Overview 1-5