NEC VERSA DOCKING STATION 4000 Manual page 79

4. Attach the cables for your drive type as follows.
When installing SCSI drives, you must pur-
chase an optional SCSI cable. If you are installing
Plug and Play SCSI devices, purchase a cable that
comes with a terminated connector. You can pur-
chase this optional cable from your NEC dealer.
n
For diskette drives:
Look in the package of cables and find the disk-
ette drive signal cable.
Connect the diskette drive signal cable to the
docking station interface board as shown in the
following figure.
Diskette Drive Cable
Adding Options 4-21