Attaching Scsi Drive Cables - NEC VERSA DOCKING STATION 4000 Manual

Attaching SCSI Drive Cables

4-44 Adding Options
Attach SCSI drive cables as follows.
To install a SCSI drive, you must purchase an
optional SCSI cable. If you are installing Plug and
Play SCSI drive, purchase a cable that comes with
a terminated connector. You can purchase this type
of cable from your NEC dealer.
Locate the SCSI cable connector on the docking station
1.
interface board. The cable should look similar to the one
shown in the following figure.
Optional SCSI cable