NEC VERSA DOCKING STATION 4000 Manual page 42

3-6 Setting Up and Using the Software
If you did not follow these instructions, click
"Exit." Go back to the beginning of this section,
"Docking Station 4000 Setup Utility," and start
over.
When prompted, select installation operations in the
9.
following order.
n
Driver installation
Click the "Driver Installation" button.
Select "Automatic Board Configuration" at the
prompt
Click the "Install Software" button to install the
audio software at the next prompt.
n
Software installation
Press
directory PCAUDIO for loading the audio soft-
ware.
Press
Choose "Complete Installation" for the type of
installation to follow.
At the prompt, insert Audio Applications
diskette 2 into the drive and press
Click "Restart Windows" to reboot Windows. (You
10.
may need to perform a cold boot.)
See "Docking Station 4000 Setup Software" for infor-
11.
mation about using Docking Station 4000 software.
Enter or click "OK" to accept the default
Enter again to create the directory.
.
Enter