Preparing The Nec Versa For Docking - NEC VERSA DOCKING STATION 4000 Manual

Preparing the NEC Versa for Docking

2-4 Docking/Undocking the NEC Versa
Once you connect the power cable to the docking station,
keep it plugged in and the power turned on. That way, the
docking station is always ready for the docking procedure.
Follow the procedure given next to prepare the NEC Versa
for docking.
Set NEC Versa power for your system as follows.
1.
n
If you have a Plug and Play NEC Versa, put your
system into Suspend mode or turn off power before
docking.
For example, the NEC Versa 4000 with Windows 95
running is a Plug and Play system.
n
If you have a non-Plug and Play system, turn off
system power before docking.
Non-Plug and Play systems include the UltraLite
Versa, NEC Versa E, NEC Versa M, NEC Versa P,
or NEC Versa V.
Make sure your system is in Suspend mode
or powered off as appropriate before docking. If the
NEC Versa is in Active mode or power is on during
docking, the docking station ejects the computer.
2. If you are running the NEC Versa on AC power, dis-
connect the AC adapter cable from the NEC Versa.
Before disconnecting power, save any open
files or close open applications to avoid data loss.