COVER REMOVAL
4-2 Adding Options
Follow these steps to remove the docking station cover.
Make sure docking station power is off, the NEC
Versa is not docked, peripheral devices are discon-
nected, and cables are detached from the docking
station before beginning installation procedures.
Turn the Docking Lock to the Locked position for easier
1.
cover removal and replacement. This setting also keeps
the manual docking lever in place while removing and
replacing the cover.
Failure to set the Docking Lock to Locked before
removing or replacing the cover can cause damage
to the locking mechanism.
Remove the CRT Base from the docking station.
2.
Locate and turn the cover latch on the back of the dock-
3.
ing station. You may need to use a coin or flat-head
screwdriver to turn the latch.
WARNING
CAUTION