Emergency Undocking - NEC VERSA DOCKING STATION 4000 Manual

Emergency Undocking

You may need to undock your NEC Versa when power to
the docking station is unavailable or is unexpectedly
interrupted.
When necessary, use the following emergency undocking
procedure to undock the NEC Versa:
If possible, turn off NEC Versa power or put the system
1.
into Suspend mode (a half moon is displayed on the
LCD panel).
If the NEC Versa cannot be powered off or
put into Suspend mode, turn off the main power
switch on the back of the docking station before
continuing.
Turn the docking station key to the Unlock position:
2.
3. Close the NEC Versa LCD panel.
Raise the manual docking lever.
4.
Removing the NEC Versa
Docking/Undocking the NEC Versa 2-13