Headphones Or Speakers; Headphones; Speakers - NEC VERSA DOCKING STATION 4000 Manual

Headphones or Speakers

Headphones

Speakers

5-8 Connecting Peripheral Devices
If you encounter excessive noise or speaker
feedback while recording, try lowering the volume or
moving the speakers away from the docking station.
Use the headphones port to connect either headphones or
external speakers to the docking station.
Before plugging in headphones, make sure the
system volume software setting is not set to maxi-
mum. A maximum volume setting can cause injury
to your ears.
When you connect headphones, the internal docking station
speakers are disabled. To connect headphones, insert the
headphone jack into the headphones port.
When you connect external speakers, the internal docking
station speakers are disabled. Connect external speakers as
follows:
Set up your speakers according to the directions that
1.
came with them.
Locate the headphone port on the back of the docking
2.
station.
Plug in the speaker audio cable jack into the headphone
3.
port on the back of the docking station.
WARNING