Docking Station 4000 Setup Software; Choosing A Configuration - NEC VERSA DOCKING STATION 4000 Manual

Docking Station 4000 Setup Software

Choosing a Configuration

This section describes how to use the software that the
Docking Station 4000 Setup utility loads in your NEC
Versa.
n
At start up, the NEC Versa lets you choose a configura-
tion to use. See "Choosing a Configuration" for infor-
mation.
n
NEC Versa M users can use either the Docking Sta-
tion 4000 sound system or the NEC Versa sound sys-
tem. See "Using the Audio Switcher Utility" for more
information.
n
Some programs run from MS-DOS instead of Windows.
Use the information under "Using DOS-Based
Programs" to enable and control Docking Station 4000
sound from MS-DOS applications.
After setting up the Docking Station 4000 software, your
NEC Versa boot-up differs from its original procedure. The
new boot up sequence lets you choose which configuration
to use.
Use the new boot up procedure as follows:
Power on your NEC Versa as you would normally. A
1.
menu similar to the following is displayed.
1. Docking Station 4000 Configuration
2. Mobile Configuration
3. Docked Configuration
Setting Up and Using the Software 3-7