Troubleshooting - NEC VERSA DOCKING STATION 4000 Manual

TROUBLESHOOTING

C-2 Solving Problems
n
While trying to record using the microphone, excessive
noise is emanating from the speakers.
Try moving the speakers away from the docking
station.
Check to see if the microphone you are using is the
recommended type (see the microphone specifica-
tions listed in Appendix A).
Open the Audio Applications in Windows and adjust
the volume control with the slide bar. You can also
try adjusting the Mic control in the Mixer.
n
Pressing the power button does not turn on the docking
station.
Check that the AC power cable is connected
properly to the docking station and a wall outlet.
Check the wall outlet by plugging in another
electrical device such as a lamp.
Check that the Power Button on the back of the
docking station is in the On position. (The vertical
bar ( | ) should be pressed down.)
n
No sound can be heard from the docking station
speakers.
Check the volume control. Check your software and
make sure the controls are not turned down.
Check that you do not have headphones plugged in.
docking station speakers do not output sound to the
speakers when headphones are in use.