NEC VERSA DOCKING STATION 4000 Manual page 30

2-8 Docking/Undocking the NEC Versa
An optical sensor in the docking mechanism senses the
NEC Versa and initiates the mechanical docking se-
quence. The mechanism grasps the sides of the NEC
Versa and pulls it in to dock it. Docking is completed
when a docking sensor is tripped.
When docking is successful, the Docking LED lights a
steady red.
If the Docking LED blinks, power off the
docking station and remove the NEC Versa manu-
ally. (See "Emergency Undocking.") Power on the
docking station and try again.
A blinking Docking LED indicates that something
went wrong with the docking sequence due to an er-
ror or hardware failure. If the LED continues to blink
after you re-attempt docking, call your authorized
NEC service representative.
To lock your NEC Versa onto the docking station, insert
4.
the key into the lock and turn it. The Docking Lock pro-
vides three lock settings that let you control NEC Versa
removal.
Unlocked – lets you remove the NEC Versa manu-
ally, through software, or with the Eject button. Use the
unlocked position for emergency undocking. Otherwise,
use the Normal lock setting for normal use and the
Locked setting to secure your system to the docking sta-
tion.