Front And Top - NEC VERSA DOCK Service Manual

n
User Documentation — introduces you to the NEC Versa Dock and
guides you through initial docking and setup.
n
AC Power Cable — allows you to connect your NEC Versa Dock to AC
power.
Always use the power cable that ships with the NEC Versa Dock. If you
need to replace the cable, follow these standards:
n
NEC Versa Dock Keys.
NEC Versa Dock Features
NEC Versa Dock features are found on all sides of the unit. To become familiar
with these features, read each of the following sections.

Front and Top

The following figure shows the features found on the front and top of the NEC
Versa Dock. Descriptions of these features follow the figure.
A - Docking connector B - Docking guides C - Right file bay
D - Power button E - Status LEDs F - Dock/Undock button
G - Left file bay
In North America, the cable should be rated for 120 volts (V), 7
amps(A). The plug is a NEMA 5-15P. Use an SVT or SJT 18/3 AWG
cable that is less than 15 feet (4.5 m) long. Use connector type
IEC320.
In Europe, the cable should be rated for 230 V (220-240 V), 10A. The
plug is country-specific. Use an H05VV-F or H05VVH2-F cable that
is less than 15 feet (4.5 m) long. Use connector type EN60320.
Front and top features
Introducing the NEC Versa Dock 1-3