NEC VERSA DOCK Service Manual page 58

For non-Plug and Play operating systems such as Windows
NT 4.0, make sure the NEC Versa is powered off whenever
you add or remove an external keyboard or mouse.
Connecting an external keyboard or mouse to the system in
Operation mode can cause the system or device to
malfunction.
2. Connect the keyboard cable connector to the keyboard port on the NEC
Versa Dock. Connect the mouse cable connector to the mouse port on the
NEC Versa Dock.
Connecting an external keyboard and mouse
3. For non-Plug and Play operating systems such as Windows NT 4.0, power
on the system. The system immediately recognizes the keyboard or mouse.
After you connect an external keyboard, you can use both
the built-in keyboard and external keyboard simultaneously.
(Only the numeric keypad on the external keyboard works in
this case.)
External Monitor
The NEC Versa Dock is equipped with an industry standard 15-pin VGA
monitor connector. The monitor connector supports a video graphics array of
various resolutions. See the monitor's user's guide for details.
Follow these steps to connect an external monitor to the NEC Versa Dock.
2-42 System Configuration and Setup