NEC VERSA DOCK Service Manual page 48

11. Secure the screw that attaches the bracket to the NEC Versa Dock.
A - File bay bracket screw
12. If you have another file bay device to install, do so before replacing the
cable cover, docking tray, and front panel.
You are now ready to reconnect the cables to the motherboard.
Reconnecting the Cables to the Motherboard
Reconnect the cables to the motherboard as follows.
1. Before handling any internal components, discharge static electricity from
yourself and your clothing by touching a nearby metal surface.
2. Locate the power cable slot, IDE signal cable slot, and the audio cable slot
(if necessary) found directly behind the IDE device installed. If you are
installing the optional VersaBay III Adapter Kit, also locate the VersaBay III
cable slot.
Locating ports and reconnecting cables to the left side of the motherboard
2-32 System Configuration and Setup
Securing the bracket and device screw