This sub-assembly contains the expansion connector board and the docking
connector board.
Remove the docking connector board by removing two screws (
A
) and the PCI
connector board by removing four screws (
).
B
Screws for the PCI connector board and docking connector board
Power Supply
Remove the power supply by removing four screws (two (
) on the back of the
C
unit and two on the interior which secure the two right angled feet of the power
supply). It is necessary to disconnect any cables that still may be connected to
the main board from the power supply.
Power Supply screws
Disassembly and Reassembly 3-13