NEC VERSA DOCK Service Manual page 46

4. Attach the cables to the IDE device or the optional VersaBay III Adapter
Kit. (See the instructions in "Connecting IDE Device Cables" or
"Connecting VersaBay III Adapter Kit Cables" for details.)
5. Locate and remove the screw that secures the device bracket in the bay. (Put
the screw in a safe place for use during reassembly.)
Removing the screw securing the device bracket
A - Device bracket screws (2)
As an added security feature, the keylock switch must be in
the Manual position before the file bay brackets can be
removed. If the keylock switch is in the Locked position, the
file bay bracket will not slide forward. This prevents device
removal while the keylock switch is in the Locked position.
6. Verify that the keylock switch is in the Manual position. The device bracket
will not slide out of the file bay unless the keylock is in the Manual position.
7. Slide the device bracket out of the NEC Versa Dock.
2-30 System Configuration and Setup
Removing the bracket