NEC VERSA DOCK Service Manual page 45

Connecting VersaBay III Adapter Kit Cables
Connect the VersaBay III Adapter Kit cables as follows.
1. Locate the IDE cable port, the VersaBay III signal cable port, and the
VersaBay III power cable port.
Locating and connecting the cables to the VersaBay III device
A - IDE signal cable port B - Power cable port C - VersaBay III cable port
D - VersaBay III cable E - Power cable F - IDE signal cable
2. Connect the cables to the appropriate ports on the back of the optional
VersaBay III Adapter Kit.
You are now ready to install the optional VersaBay III Adapter Kit into the file
bay. (See the instructions in "File Bay Installation" for details.)
File Bay Installation
Install an IDE device or the optional VersaBay III Adapter Kit in the file bay as
follows.
1. Before handling any internal components, discharge static electricity from
yourself and your clothing by touching a nearby metal surface.
2. Remove the NEC Versa Dock front panel, docking tray, and cable cover.
(See the instructions in "Removing Trays, Panels, and Covers" for details.)
3. Remove the cables from the motherboard. (See the instructions in
"Disconnecting Cables from the Motherboard" for details.)
System Configuration and Setup 2-29