NEC VERSA DOCK Service Manual page 41

8. Lift the cable cover up and off the NEC Versa Dock.
You are now ready to disconnect the cables from the motherboard. (See the
instructions in "Disconnecting the Cables from the Motherboard" for details.)
Disconnecting the Cables from the Motherboard
Disconnect the cables from the motherboard as follows.
1. Before handling any internal components, discharge static electricity from
yourself and your clothing by touching a nearby metal surface.
2. See the appropriate figure for the bay that you are using to disconnect cables
from the motherboard.
The following figure shows cable locations in the NEC Versa Dock.
Removing the cable cover
Left-hand bay cables and ports
System Configuration and Setup 2-25