Table of Contents
Advertisement
Checking System Memory
Use the following procedure to:
T
check the memory installed in the system
T
determine the SIMM configuration needed to increase
memory
NOTE
the same memory type.
T
identify SIMM sockets.
1.
Locate the four SIMM sockets on the system board (see
"Option Installation Procedures" earlier in the chapter.
If any cables block access to the SIMM sockets, label
and disconnect them. If any boards block access to the
sockets, remove them.
2.
Use the following table to determine the SIMM
configuration needed to upgrade memory and to identify
the sockets for SIMM installation.
3-18 Installing Options
SIMM memory must be installed in pairs of
Advertisement
Table of Contents
