Removing An Expansion Board - NEC POWERMATE VE ETC Manual

Hold the slot cover support over the expansion board
5.
bracket and replace the two screws removed earlier. The
slot cover support secures the expansion board in place.
6. Attach any signal cables required by the expansion
board.
7. Replace the system unit cover.

Removing an Expansion Board

Remove the system unit cover as previously described.
1.
Label and remove any cables connected to the board.
2.
NOTE
"Removing an Expansion Board from the Inside
Slot."
3-14 Installing Options
Expansion Board
Bracket
Attaching the slot cover support
To remove a board from an inside slot, see
Screws
Slot Cover
Support