The Boot Menu; The Exit Menu; Save Changes & Exit - NEC POWERMATE VE ETC Manual

THE BOOT MENU

Selecting "Boot" from the menu bar displays the following
list of boot devices:
T
Diskette Drive
T
CD-ROM reader
T
Hard Drive

THE EXIT MENU

Selecting "Exit" from the menu bar displays the following
exit options. Note that
must select one of the items from the menu or menu bar to
exit.
T
Save Changes & Exit
T
Discard Changes & Exit
T
Get Default Values
T
Load Previous Values
T
Save Changes.
Save Changes & Exit
After making your selections on the Setup menus, always
select Save Changes to Non-Volatile RAM (NVRAM) to
make them operative.
Unlike standard RAM memory, NVRAM is sustained by a
real-time clock chip and stays on after you turn your system
off.
After you save your selections, the program displays this
message:
If you attempt to exit without saving, the program asks if
you want to save before exiting.
4-22 Setting System Parameters
does not exit this menu. You
Esc
Values have been saved to CMOS!
Continue