Clearing Your Password - NEC POWERMATE VE ETC Manual

CLEARING YOUR PASSWORD

If you forgot your password, use the following procedure to
clear your current password and to set a new one.
Power off and unplug the system and any peripherals.
1.
The system power must be off before removing the
cover and changing a jumper setting.
2. Remove the system unit cover (see "Removing the
System Unit Cover" in Chapter 3).
3. Locate the Password Clear jumper pins on the system
board (see the figure "Locating system configuration
jumpers" earlier in the chapter).
You may have to remove any installed expansion boards
to access the jumpers (see "Removing an Expansion
Board" in Chapter 3).
4. Set a jumper on the Password Clear jumper pins.
Replace the system unit cover (see "Replacing the
5.
System Unit Cover" in Chapter 3).
!
WARNING
Password Clear
Normal (default)
Password Clear
Password clear jumper
Setting System Board Jumpers 5-5