Replacing The Front Panel - NEC POWERMATE VE ETC Manual

Replacing the Front Panel

Replace the front panel only after it has been removed for a
5 1/4-inch device installation. If installing a 5 1/4-inch
device, see "Installing the 5 1/4-Inch Device."
Align the four front panel tabs with the holes in the front
1.
of the system unit.
Evenly press the front panel into position until the tabs
2.
lock the panel in place.
Tabs
(behind front panel)
Continue to Step 5 in "Replacing the 3 1/2-Inch Drive
3.
Bracket."
Front Panel
Tabs
(behind front panel)
Blank Panel
Aligning the front panel
Installing Options 3-41