Advertisement
Available languages
Available languages
English
CONTROLS
STANDBY
Connecting a switch to put the amplifier in standby.
Contact closed => standby mode.
GPI - BUTTON/SWITCH CONNECTION
Connecting a button/switch powered by the IA3204R amplifier (on the left) or powered externally (on the right). It
is configured in the GPIO => Configure section of the AURORA NET software.
GPO - LED CONNECTION
Connecting a LED powered by the IA3204R amplifier (on the left) or powered externally (on the right). It is
configured in the GPIO => Configure section of the AURORA NET software.
IA3204R
Cod. 420120450 REV. 1.0
46
Advertisement
Chapters
Need help?
Do you have a question about the IA3204 R and is the answer not in the manual?