1� - Verification Upon Reception; 2� - Product Description - Circutor line-EDS-iMonitor Instruction Manual

line-EDS-iMonitor
1. - VERIFICATION UPON RECEPTION
Upon receiving the device, check the following points:
a) The device meets the specifications described in your order.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- An installation guide.
If any problem is noticed upon reception, immediately contact the transport com-
pany and/or CIRCUTOR's after-sales service.
2. - PRODUCT DESCRIPTION
The line-EDS-Monitor is a device that works as connector between field devices with Modbus RTU or
Modbus TCP communications, and has the PowerStudio SCADA energy management software built in.
The devices have:
- 5 indicating LEDs
- 2 digital outputs.
- RS-485 and Ethernet communications.
- Wi-Fi connection.
The line-EDS-Monitor features a web server to set up the device and display the variables of all the
modules or devices connected to it. As well as a specific web server for iMonitor communications.
Instruction Manual 7