6� - Line-Eds-Imonitor Configuration Website - Circutor line-EDS-iMonitor Instruction Manual

line-EDS-iMonitor
6. - line-EDS-iMonitor CONFIGURATION WEBSITE
The internal website to configure the line-EDS-iMonitor model is located at:
http:/ /xxx�xxx�xxx/html/setup�html
http:/ /nombre_dhcp/html/setup�html
http:/ /100�0�0�1/html/setup�html
Where: xxx�xxx�xxx is the IP address assigned by the user.
nombre_dhcp is the name assigned and authenticated by the name server of the local area
network (LAN).
Note: The device leaves the factory with DHCP enabled.
Note: To find the device in a local network, a crossover cable has to be used to access the device's
local IP: 100.0.0.1 with a subnet mask 255.255.255.0
If a username and login password have been set up, when trying to access via the web, the website
requests these login parameters on the following pop-up screen,
shows the configuration website.
Figure 16
Instruction Manual
Figure 15: Username and password�
Figure 16: Configuration website: line-EDS-iMonitor�
Figure 15.
19