Floppy Disk Drive - NEC powermate dt Disassembly

Fig. 3:
3. Slide the bay towards the back of the system in order to
free the hooks that anchor the bay to the chassis.
4. Carefully lift rear of the bay and pull the whole assembly out
of the chassis.
3. Removing FDD, CD-ROM, Hard Disk
Drive
To remove FDD, CD-ROM or hard disk drive first open the
chassis (see the section Opening the Chassis), take the drive
bay out of the system (see Removing the Drives Bay) then do
as follows:

Floppy Disk Drive

n
1. Remove the two screws at the side of the floppy disk drive
as shown.
2. Slide the floppy disk drive towards the back of the bay to
disengage the lock on its bottom.
Fig. 4:
3. Turn the floppy disk drive up-side down.
4. Remove the screws as shown in Fig. 5: .
Unscrewing the drive bay
Removing the side screws
Disassembly and Reassembly - 4
B
C
B