Table of Contents
Advertisement
T
Inactivity Timer
The Inactivity Timer lets you set the length of time that
the system needs to be inactive before entering its low-
power or Standby mode. The low-power mode powers
down various devices in the system until you resume
using it. You can select from "Off," "1," "2," "4," "6,"
"8," "12" or "16 minutes." A setting of 1 minute
achieves maximum power savings, while a setting of
16 minutes allows maximum performance.
T
Fixed Disk
This option controls whether or not a spin down
command is issued to the hard drives when the system
goes into a low-power mode. Your choices are
"Enabled" (the default) or "Disabled."
T
VESA Video Power Down
This option controls power to the monitor during the
low-power modes. Your choices are "Disabled" or
"Enabled" (default).
Press the right arrow (cursor) key to move to the Boot
Menu.
Boot Menu
The Boot Menu can be used to adjust the system's boot
features. The Boot Menu features the following options:
Setting some items in any menu to incorrect values
can cause your system to malfunction.
4-22 System BIOS and Utilities
!
CAUTION
Advertisement
Table of Contents
