NEC DIRECTION L Manual page 190

Hide thumbs Also See for DIRECTION L:
Table of Contents

Advertisement

Message
Operating System not found.
Cause
The operating system cannot be found in either
Drive A or Drive C.
Solution
Run the Setup program and make sure the
fixed disk and drive A are properly identified.
Message
Press <F1> to resume, <F2> to enter SETUP.
Cause
Displayed after any recoverable error
message.
Solution
Press the <F1> key on your keyboard to start
the boot process, or <F2> to enter the Setup
Utility program and change any settings.
Message
Press <F2> to enter SETUP.
Cause
Optional message displayed during POST.
Can be turned off in the Setup program.
Solution
Run the Setup program and disable the
feature.
Message
Parity Check 1.
Cause
Parity error found in the system bus. BIOS
attempts to locate the address and display it
on the screen. If it cannot locate the address, it
displays ????.
Message
Parity Check 2.
Cause
Parity error found in the I/O bus. BIOS
attempts to locate the address and display it
on the screen. If it cannot locate the address, it
displays ????.
System Board, Connectors, and Error Messages D-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Direction l-series

Table of Contents