NEC DIRECTION L Manual page 78

Preparing the Device
Before installing a storage device in the system, follow any
preinstallation instructions that come with the device. For
example, check the following:
T
Diskette drive
optional diskette drive. See the documentation included
with the drive.
T
IDE device
before installing it. See the documentation that comes
with the device for jumper setting information.
remove any termination jumpers on the
check the jumper settings on the device
An IDE device, such as an IDE hard disk or IDE
CD-ROM reader, must be set correctly as the first
(master) or second (slave) device on the IDE
channel.
Locating accessible devices
Installing Options 5-19