Table of Contents
Advertisement
(If necessary, repeat Steps 2 through 4 if an additional
6.
module was installed in the other DIMM socket.).
Installing a DIMM
Use the following procedure to install a DIMM.
Remove the access cover (see "Removing the Access
1.
Cover).
Locate the DIMM sockets.
2.
Remove any currently-installed DIMMs that are not
3.
needed. See "Removing a DIMM" in this chapter.
Before installing a DIMM, reduce static discharge by
touching the system's metal chassis.
To install a DIMM, align the module with an empty
4.
socket. Make sure that the notches on the DIMM line up
with the keys in the sockets.
5-16 Installing Options
!
CAUTION
Advertisement
Table of Contents
