Table of Contents
Advertisement
T
Diskette A:/B:
These fields specify the capacity and physical size of
Diskette Drive A and B (if included). To change these,
highlight the field for the drive, press the
select from the following options:
If you add an optional 5.25-inch diskette drive to your
system, select Diskette B and change the parameter to
1.2 MB, 5.25 inch.
T
Floppy Write Protect
This option enables or disables write protection for the
diskette drive(s). Choose the desired setting to enable or
disable (default) this option.
To return to the Main Setup Menu, press the
IDE Devices
The next four entries, Primary IDE Master and Slave and
Secondary IDE Master and Slave, refer to settings for IDE
devices. These fields report the presence of, and
identification for as many as four physical IDE devices, two
on each PCI/IDE connector.
Disabled
360KB, 5.25 inch
1.2MB, 5.25 inch
720KB, 3.5 inch
1.44/1.25 MB, 3.5 inch (default for Drive A)
2.88 MB, 3.5 inch.
Enter
key and
key.
Esc
System BIOS and Utilities 4-7
Advertisement
Table of Contents
