Boot Menu - NEC Direction T-Series Manual

T
Hard Drive
This option enables or disables hard drive power down. Your choices are
"Enabled" (default) or "Disabled."
T
VESA Video Power Down
This option sets the monitor's power management mode. Your choices are
"Disabled," "Standby" (default), "Suspend," or "Sleep."
Press the right arrow (cursor) key to move to the Boot Menu.

BOOT MENU

The Boot Menu can be used to adjust the system's boot features. The Boot Menu features
the following options:
T
Restore on AC/Power Loss
This option specifies how the system responds to power restoration after an
unexpected power loss. The options are "Stay Off" (default) which keeps the
power off until the system's power button is pressed, "Power On" which restores
the system's power, and "Last State" which restores the previous power state.
T
On Modem Ring
This option sets whether or not the modem powers up on boot or remains off
until manually activated. The options are "Stay Off" and "Power On" (default).
T
Scan User Flash Area
This feature enables or disables automatic scanning of the user flash area on
bootup. "Disabled" is the default.
T
First/Second/Third/Fourth Boot Device
You can select the sequence of boot devices by type. Pressing your keyboard's +
(plus) or – (minus) key allows you to select the order. For maximum system
accessibility, Removable Device should always be set as the First Boot Device.
Setup Utility 2-15