Table of Contents
Advertisement
T
to customize your system with security features such as
passwords
T
to set system parameters in the event that you need to
replace the CMOS battery.
How to Start Setup
To start the Setup utility, follow these steps:
Turn on or reboot the system.
1.
Press
2.
up, to start the memory test. You have about five
seconds to press
Setup's Main Menu appears.
How to Use Setup
The bottom of all menus show the specific keys used to
navigate around the menus. Pressing the
Help screen. The right hand side of the menu is pop-up
item-sensitive help.
Use the left and right arrow keys (or cursor keys) to select
one of the menus (Main, Advanced, Security, etc.) and the
up and down arrows to move to an option within a menu.
Press
Enter
value either with the arrows or with the plus and minus
(+ or –) keys.
Some entries cannot be changed; their function is to report
the status of a system parameter. Other entries, when
marked with an arrow (
you press the
after POST begins, but before the system boots
F2
F2
before system boot continues.
to select an option or submenu. Change the
) symbol, lead to submenus when
key.
Enter
key brings up a
F1
System BIOS and Utilities 4-3
Advertisement
Table of Contents
