Table of Contents
Advertisement
Don't change the translation mode setting from the
option selected when the hard drive was formatted.
Changing the option after formatting could result in
corrupted data!
T
32 Bit I/O
This option enables (default) or disables 32 Bit IDE data
transfers between the processor and the IDE device.
T
Transfer Mode
This option specifies the method for transferring data
between the hard drive ans system memory. This option
cannot be changed when "Auto" is selected. The options
include:
T
Ultra DMA
This option sets the Ultra DMA Mode for the hard drive.
This option cannot be changed when "Auto" is selected.
The options include:
4-10 System BIOS and Utilities
!
WARNING
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4 (default).
Mode 0
Mode 1
Mode 2
Disabled (default).
Advertisement
Table of Contents
