Table of Contents
Advertisement
The following table summarizes the system board jumper
settings.
System Board Jumper Settings
FUNCTION
JUMPER J8B2
Normal
Configure
Recovery
CLEARING YOUR PASSWORD
The following sections describe how to clear your
password.
1.
Turn off the power and unplug the system and any
peripherals.
Turn off the system before you change any jumper
settings.
Remove the access cover (see "Removing the Access
2.
Cover" in Chapter 5).
Locate the Configuration jumper (J8B2) on the system
3.
board (see "Locating the Jumper" in the previous
subsection).
6-2 Setting System Board Jumpers
CONFIGURATION
1-2
The BIOS uses current
configuration information and
passwords for booting.
2-3
After POST, Setup runs
automatically. The
Maintenance menu appears.
None
BIOS attempts to recover the
BIOS configuration. A recovery
diskette is required.
!
WARNING
Advertisement
Table of Contents
