Clearing Your Password - NEC READY ES PRO Manual

Clearing your password

If you forgot your password, use the following procedure to clear
your current password and to set a new one.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Turn off and unplug the system and any external options.
Remove the system unit cover (see "Taking off the cover").
Locate the Password Clear jumper (J9C1-A) on the system
board (see the "Locating system configuration jumpers"
figure in this section).
You might have to remove any installed expansion boards to
access the jumper (see "Removing a board").
Move the jumper to the Password Clear jumper pins
(pins 2-3).
Replace the system unit cover (see "Replacing the cover").
Connect the system and monitor power cables.
Power on the monitor and system. The system lets you boot
your computer.
Power off and unplug the system and monitor.
Remove the system unit cover.
Move the jumper to the Password Enabled jumper pins
(pins 1-2).
System resources 77