Table of Contents
Advertisement
Printer problems
T
Clearing your password
If you forgot your password, use the following procedure to clear
your current password and to set a new one.
1.
The system power must be off before removing the side
panel and changing a jumper setting.
2.
3.
4.
You set up your printer with your Ready Multimedia
Computer and the printer does not perform as expected
First check the instructions that come with the printer. Be sure
that you've installed the necessary printer drivers on your
system.
If printer drivers did not come with the printer, contact the
printer manufacturer for the latest printer driver.
Power off and unplug the system and any peripherals.
!
Remove the system unit cover (see "Taking off the cover" in
the System Upgrade and Reference Guide).
Locate the Password Clear jumper on the system board. (See
"Clearing your password" in the System Upgrade and
Reference Guide).
You might need to remove any installed expansion boards to
access the jumpers (see "Expansion boards" in the System
Upgrade and Reference Guide).
Set a jumper on the Password Clear jumper pins.
WARNING
Solve problems 73
Advertisement
Table of Contents
