Autoredial; Call Timer; View Calls - NEC D400 Manual

Autoredial

With this facility on, your phone will try up to 10 times to redial a number if the first attempt fails. The intervals between each redial will get
longer after each attempt. A tone will be heard at each redial attempt. The failure to connect a call can be due to network problems or if the
other phone is busy. Pressing any key during a redial attempt will abort it. To set redial on or off, proceed as follows:
*
MENU
Press 8 4. Press 1 to turn Auto redial on or 2 to turn it off.

Call timer

View calls

*
MENU
Press 5 1. Then press the appropriate key for the calls to be viewed (see table right).
*
MENU
Use the and
*
Press the C key to return to the view calls menu or press and hold it down to return to standby.
Last call
The last call screen will display the duration of the last call made on your phone.
All calls
The all calls screen will display the duration of all calls made from your phone since the last time the call timer was reset and also the split
between calls made on your 'home' network and those made whilst roaming.
Outgoing
The outgoing calls screen will show the total time duration of all outgoing calls and also the split between calls made on your 'home' network
and those made whilst roaming.
Incoming
The incoming calls screen will show the total time duration of all incoming calls and also the split between calls received via your 'home'
network and those received whilst roaming.
21
keys to scroll through the information.
O
The Auto redial attempt tone will still be
heard even if the phone is set to the silent
mode (see page 19).
I
The Call Timer function will only be
displayed if your network or SIM
card does not support AoC.
View type
Last call 1
All calls 2
Outgoing 3
Incoming 4
No.