Start To Use; Battery; The Disassembly And Installation Of Battery; Battery Charging - NEC N6207 User Manual

Table of Contents

Before using the mobile phone, please read this section. The section will tell you how to install charge

and maintain your mobile phone's battery. It also tells you the information about the digital GSM network and

instructs you how to insert and unlock SIM card. The detailed information about it will be also stated in the

section.

1.1

The mobile phone contains one battery. When purchasing, the battery is not charged, but maybe supports

to turn on the phone. A new battery should be charged for at least 16 hours, after the battery is used up

for the first time, then it is charged fully for use; same as the second and third time, then the battery will

easily reach the best status for use.

1.1.1

When dissembling, make the mobile phone back face upward, and press the back cover's battery lock

button at the bottom of the mobile phone, then slip the back cover upward and take off the back cover.

Pull the tail of the battery upward and take out the batter.

When installing, insert the clip at the top of the battery into the corresponding clamping slot in the phone

and press the battery downward, then install the phone's back cover. Make sure that you have installed

battery well before turning mobile phone on.

1.1.2

Insert the adapter of the charger into the plughole of mobile phone as follows；

Connect the charger with the power. At this moment, a sign of battery will sparkle indicating the battery

is charging;

When the power capacity reaches the fourth level, and charging sign changes to the power capacity,

which means the charging is completed. During the charging, the battery, mobile phone and charger will

become heated, which is normal phenomena;

After the charging completed, disconnect the power and pull off the charger.

Warning:

1 Start to use

N6207 User manual

第 12 页

Table of Contents